Daily Maintenance Strategies for Computerized Embroidery Machines

Computer embroidery machines are a powerful tool produced by computer embroidery manufacturers, and it is precisely they that achieve mass production of embroidery. Computer embroidery machines are machines that can work 24 hours a day, but daily maintenance is also indispensable. Routine maintenance is an important factor in ensuring the normal operation and extending the service life of computerized embroidery machines. So what are the daily maintenance of computerized embroidery machines? Dongguan Yuanxin Embroidery summarized as follows, and interested friends are also welcome to join us to add.

Daily maintenance of computerized embroidery machines. Timely cleaning of the machines is not only for the beauty of the machines, but also for their good working condition to achieve exquisite embroidery effects.

1、 Cleaning components, parts, intervals, cleaning methods

(1) Use a brush to clean the bobbin hook mechanism, rotary hook, bobbin shell, bobbin core, etc. daily to remove debris and thread ends, and do not use sharp and hard tools to clean them;

(2) Remove debris and thread ends from the thread take-up mechanism, thread take-up rod, thread path, felt, etc. every day;

(3) Clean the front and rear four pairs of guide rails of the Y-axis cloth feeding mechanism every day;

(4) The X-axis cloth feeding mechanism and the guide rail are cleaned every day;

(5) The wire clamping mechanism, wire clamping piece, rotating wheel, thread take-up, spring, and wire duct shall be regularly cleaned and wiped clean;

(6) Power supply boxes, drive boxes, and other places where hygiene is often overlooked, the surface and ventilation must be regularly wiped.

2、 Maintenance parts, lubricating parts, oils, intervals, maintenance methods

(1) Grease the main shaft gearbox sprocket chain every month, and open the bearing in the cover plate to grease every month;

(2) The hook, shell, and shaft of the thread hooking mechanism are coated with white oil every day, and the needle plate hole and tapered step gear are opened and the anchor plate is coated with butter every month;

(3) Grease the opening panel of the cam slot of the color changing mechanism every month, and grease the opening panel of the meshing gear every six months;

(4) The vertical shaft and thread take-up rod of the barbed lead wire move the needle position to 6 needle positions every day to inject oil from the oil groove. The connecting rod is provided with oil holes on the upper cover plate every day, and the shaft bearing is opened with butter on the upper cover plate once every six months;

(5) The thread take-up shaft and needle rod of the thread take-up mechanism are filled with oil daily in the vertical groove of the guide plate with needles;

(6) Grease the front and rear guide rails of the Y-axis cloth feeding mechanism once a month, and grease the guide rails of the X-axis cloth feeding mechanism once a month;

(7) Open the cover plate of the wire clamping mechanism gear and apply grease

(8) Remove the embroidery frame guide rail with butter once every six months.

3、 Precautions during maintenance

(1) Use a brush to clean the rotary hook, shell, and core of the thread hooking mechanism, and do not use sharp and hard tools to remove debris and thread ends

(2) Remove debris and thread ends from the thread take-up rod, thread path, and felt of the thread take-up mechanism

(3) Four pairs of guide rails (Type 615) at the front and rear of the Y-axis cloth feeding mechanism are on the same platform

(4) X-axis cloth feeding mechanism guide rail two Tiantongshang

(5) The wire clamping piece, rotating wheel, thread take-up, spring, and wire duct of the wire clamping mechanism are often cleaned of debris

(6) Clean up debris on the surface of the work table

(7) Frequently wipe and open the back cover on the surface of the computer and the exhaust fan

(8) The surface and ventilation of power box and drive box are often the same as above

4、 Methods for maintaining oil intervals at lubricated parts of components

(1) Open the cover plate of the main shaft gearbox sprocket chain grease month, and open the cover plate of the bearing grease month

(2) Thread hooking mechanism rotary hook, hook housing, shaft white oil sky needle plate hole, tapered step gear, grease moon opening needle plate

(3) Color change mechanism cam slot butter monthly opening panel, meshing gear butter half year opening panel

(4) Stab the vertical shaft of the lead wire and take up the thread rod with white oil. Move the needle position to 6 needle positions and inject oil from the oil groove. Connect the connecting rod with white oil. Open the upper cover plate with oil hole and shaft bearing grease half a year

(5) Thread take-up mechanism, thread take-up shaft, needle rod, white oil, use a needle to inject oil into the vertical groove on the guide plate

(6) Grease month for front and rear guide rails of Y-axis cloth feeding mechanism-

(7) X-axis cloth feeding mechanism guide rail grease month-

(8) Wire clamping mechanism gear grease - open the cover plate

(9) Embroidery frame guide rail butter half a year Remove the embroidery frame