Is it easy to make such a beautiful computer embroidery three-dimensional embroidery?

Stereoscopic embroidery is a common computer embroidery process. Stereoscopic embroidery can be used in many occasions, such as home furnishing, decoration, furnishings, and so on. At the same time, it can also entertain oneself, reflecting the true personality style.

Three-dimensional embroidery has its own specific drawings, and the specific embroidery method should be based on the requirements of the cross stitch drawings. The drawings all have very clear regulations on this, just like the cross stitch drawings. The specific stitch method and the number of strands of thread used for embroidery are clearly marked.

Since the inspiration of three-dimensional embroidery originated from cross stitch and was developed on the basis of cross stitch, cross stitch is basically also known as three-dimensional embroidery; There are ten types of stitch methods for three-dimensional embroidery, most of which are similar to and connected to cross stitch; The tools (scissors, thread boxes) needed for three-dimensional embroidery are as simple as cross stitch, and the scissors and thread boxes for cross stitch can also be used for three-dimensional embroidery.

Stereoscopic embroidery emphasizes three-dimensional effects, and professional designers have specially designed three-dimensional embroidery fabrics. The three-dimensional embroidery fabric is produced in the United States, and currently has 7CT and 10CT; 7CT size specifications are: 10 * 13 inches and 12 * 18 inches; The size specification of the 10CT is 10.5 * 13.5 inches.

In the cross stitch market, most of the embroidery needles in circulation are 22 #, 24 #, and 26 #, which are embroidered with two or three strands of thread; The three-dimensional embroidery needle is 16 #, 18 #, embroidered with four strands of thread, six strands of thread, and twelve strands of thread. Existing cross stitch threads can also be used for three-dimensional embroidery, but some cross stitch drawings can also be replaced with wool, which not only has a good effect, but also greatly reduces the cost.

Three-dimensional embroidery process. Three-dimensional embroidery (3D) is a three-dimensional pattern formed by using embroidery thread to wrap EVA glue inside. It can be produced on ordinary flat embroidery.

Solid three-dimensional embroidery is an embroidery technique with padding and materials to reflect the three-dimensional feeling.

3D embroidery is commonly used on hats and sneakers. If ordinary embroidery and 3D embroidery are mixed, the embroidery can produce a strong visual effect. The padding material shall be foam sponge, styrene board and other materials that do not interfere with embroidery, and its thickness shall be between the presser foot and the cloth (3~5mm).

Three-dimensional embroidery features

1. It can reflect the quantity and three-dimensional sense that cannot be reflected only by lines, making embroidery patterns more three-dimensional.

2. The thread has a three-dimensional effect on the fabric, which can more highlight the depth and luster of the color.

3. Even embroidered materials with a narrow embroidery range such as hats can present large patterns.

Three-dimensional embroidery process. Three-dimensional embroidery (3D) is a three-dimensional pattern formed by using embroidery thread to wrap EVA glue inside. It can be produced on ordinary flat embroidery.

What aspects should be paid attention to when selecting materials and brands for computer embroidery three-dimensional embroidery process?

First, the quality of the embroidery plate, which is the plastic plate mentioned earlier: The embroidery plate should be selected with good toughness and moderate hardness, and the spacing between the plates is uniform. There are many embroidery plates used by different brands or DIY kits on the market, which are soft. This type of embroidery plate has a large lattice, and after the embroidery is completed, the embroidery thread is not filled enough on the embroidery plate. Due to the soft board, the finished product cannot stand up normally after the show, and is prone to deformation. The work embroidered with such materials can only be a waste of effort by the embroiderer.

Second, the thickness of the embroidery thread should be uniform, and the thickness should be just suitable for the embroidery plate grid, and resistant to corrosion. "Uneven thickness embroidery threads can make a work very unsightly. If the embroidery thread is too thin, it will expose the bottom plate, which will affect the aesthetics of the finished product. If it is too thick, it will lead to uneven thread drawing during embroidery and easily damage the embroidery plate.".

Third, pay attention to the accuracy of drawings: There are many brands or DIY kits on the market, and there are some problems with the drawings used. It may be that the embroidery lines do not match the drawings, the number of embroidery lines differs from the number required by the drawings, or the color matching of the drawings is not beautiful, etc., which requires attention when selecting.